THANK YOU to all the members who have purchased a $10 subscription, You have been entered into the monthly drawing from CHOPPEDBAGGERS the best Bagger Forum in the world!! Drawing is the last day of each month!
Page 1 of 4 123 ... LastLast
Results 1 to 10 of 34
  1. #1
    I am starting to know my way around!
    Join Date
    Oct 2015
    Posts
    35

    My Turn To Build

    Go easy, I'm still kind of learning to post pics without Photobucket. Here goes....
    Been lurking on this site for awhile now. After Seeing Alex005 build his '09 Glide I thought it was time for me to do it. Here's some of the parts I've been getting in the last month or so.
    American Suspension Slip Fit Short Neck
    AirFX rear shocks. Going with Marks pistons in the front.
    JnR Designed factory switches for air ride and MRI center stand.
    Dirty Air El Grande (minus the rear shocks and front pistons)
    Rotation Industries Saturn Darkside 26" front wheel
    Ness Lowers
    HHI single caliper
    Speed By Design Twisted 8 lids
    Bad Dad wraped front fender
    Heres the bikes current state.....
    IMG_3164 2 by Shane Taylor, on Flickr

    Parts.....
    IMG_3351 by Shane Taylor, on Flickr
    AirFX...IMG_3357 by Shane Taylor, on FlickrIMG_3356 by Shane Taylor, on Flickr
    Last edited by Dieselhed; 10-15-2017 at 09:55 AM.

  2. #2
    I am starting to know my way around!
    Join Date
    Oct 2015
    Posts
    35
    Rotation Industries Saturn Darkside Wheel.....
    IMG_3318 by Shane Taylor, on FlickrIMG_3196 by Shane Taylor, on Flickr
    Mini Money Maker, damn I hope this looks good with a 26". Kinda stressin' about it....
    IMG_0761 by Shane Taylor, on Flickr
    Last edited by Dieselhed; 10-15-2017 at 10:26 AM.

  3. #3
    I am starting to know my way around!
    Join Date
    Oct 2015
    Posts
    35
    Topshop BMF Fairing. This is the only fairing I found that looks similar to the 2014 and up bikes which I dig....
    IMG_0716 by Shane Taylor, on Flickr

  4. #4
    I am starting to know my way around!
    Join Date
    Oct 2015
    Posts
    35
    Prepped for surgery....
    IMG_3360 by Shane Taylor, on Flickr
    No turning back now....
    IMG_3363 by Shane Taylor, on Flickr
    IMG_3367 by Shane Taylor, on Flickr

  5. #5
    I am starting to know my way around!
    Join Date
    Oct 2015
    Posts
    35
    IMG_0728 by Shane Taylor, on Flickr
    IMG_0732 by Shane Taylor, on Flickr

    Going to do it right and hide the wiring....
    IMG_0742 by Shane Taylor, on Flickr

  6. #6
    Off to a very good start. Bike is going to look good when done. What exhaust are you going to run.
    Last edited by Ferro; 10-15-2017 at 12:10 PM.

  7. #7
    I am starting to know my way around!
    Join Date
    Oct 2015
    Posts
    35
    Was leaning toward the Yaffe Cult Forty-Five. But the more I look at it the more I don’t like it. Probably end up with the Nasty Bastard. It’s what I was originally going to use.

  8. #8
    I am starting to know my way around!
    Join Date
    Nov 2016
    Location
    Russia Moscow
    Posts
    67
    Good started, like this parts. How quality this fairing? Abs or fiberglass? Where can buy the switches?
    Last edited by Alex005; 10-15-2017 at 03:14 PM.

  9. #9
    I am starting to know my way around!
    Join Date
    Oct 2015
    Posts
    35
    I got the switches from a company called J n R Designed. They are just factory switches that were relabeled and clear coated over. They can also customize them if you want. The fairing is from Topshop. Very high quality, not sure if they are injection molded like the bags are. I’ll know more when I actually get it. They are making me one now. I was told they are designed for the American suspension slip fit necks. HHI or Misfit, etc...they have to be modified. Won’t work with any bolt on kit.
    Last edited by Dieselhed; 10-15-2017 at 03:54 PM.

  10. #10
    I am starting to know my way around!
    Join Date
    Aug 2015
    Posts
    61
    Nice start
    Definitely will be nice to see when finished

    Sent from my SAMSUNG-SM-G930A using Tapatalk

 

 
Page 1 of 4 123 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
vBulletin skin by CompletevB.com.