THANK YOU to all the members who have purchased a $10 subscription, You have been entered into the monthly drawing from CHOPPEDBAGGERS the best Bagger Forum in the world!! Drawing is the last day of each month!
Results 1 to 8 of 8

Thread: Front air ride

  1. #1
    Site Supporter
    Join Date
    Dec 2014
    Location
    Newport News VA
    Posts
    759

    Front air ride

    I have a 2014 Street Glide with a 26 on the front, wanting to add air to front forks. what is everyone else out here running up front for air ride?

  2. #2
    Site Supporter
    Join Date
    Sep 2012
    Location
    McDonough, GA
    Posts
    494
    Marks air piston here!


    Sent from my iPhone using Tapatalk

  3. #3
    ""The Chopped Baggers Guy""
    Join Date
    Aug 2012
    Location
    ChoppedBaggers.com WORLD HEADQUARTERS.
    Posts
    12,446
    I have 49mm ready to ship
    Thanks for being a part of my world..

    http://www.shop.choppedbaggers.com

    Like us on Facebook and share us with the WORLD!!!

  4. #4
    Site Supporter
    Join Date
    Dec 2014
    Location
    Newport News VA
    Posts
    759
    OK please tell me everything that I will need to have front air ride. I have Arlen Ness front forks. I'm trying to get the front to go all the way down when I get off the bike. Price also.

  5. #5
    ""The Chopped Baggers Guy""
    Join Date
    Aug 2012
    Location
    ChoppedBaggers.com WORLD HEADQUARTERS.
    Posts
    12,446

    Front air ride

    The pistons just drop in your fork tubes after removing your preload spacer.

    If you have fast up air with a tank I recommend the accuair vu2 valve block.

    Basically you need two valves for the front, Pistons, a momentary rocker switch, air line a few fittings and the Pistons.

    Pistons are $80
    Thanks for being a part of my world..

    http://www.shop.choppedbaggers.com

    Like us on Facebook and share us with the WORLD!!!

  6. #6
    Site Supporter
    Join Date
    Dec 2014
    Location
    Newport News VA
    Posts
    759
    OK you have a deal, I'm heading to NC this week to ride the tail of the dragon can't wait. when I get back I'll get what you have that I need.

  7. #7
    ""The Chopped Baggers Guy""
    Join Date
    Aug 2012
    Location
    ChoppedBaggers.com WORLD HEADQUARTERS.
    Posts
    12,446
    Ok. Just let me know.
    Thanks for being a part of my world..

    http://www.shop.choppedbaggers.com

    Like us on Facebook and share us with the WORLD!!!

  8. #8
    Site Supporter
    Join Date
    Feb 2013
    Location
    Cameron, wi
    Posts
    68
    For Sale
    Looking for a set of 41mm pistons

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
vBulletin skin by CompletevB.com.